Dixon-valve 100 TON RAM SEC02 External Swaged Holedall User Manual download pdf (Page 3)

100 Ton Ram Instruction Manual

1-1/4" through 4" Standard & Long Holedall Swaged Couplings

customer service 800•355•1991

1Section 2

Install the 4" main pusher (M011-065) by sliding it

onto the rod cap of the ram cylinder. Make sure that

the pusher is all the way on the rod cap.

For 1-1/4" - 3" couplings proceed to

Step 1b

For 4" couplings, proceed to

Step 2

For 1-1/4" - 3" couplings insert the appropriate size

adapter pusher into the 4" main pusher (M011-065).

Shown here is the 2" adapter pusher (M011-115)

being inserted.

Install the required die holders ensuring that the

seams between the die holder halves do not line up.

The die holders are designed to fit one inside the

other.

A guideline for selecting die holders is:

M012-001 1-1/4" - 3" I.D. hose

M012-002 4" - 6" I.D. hose

Caution!

Never use a swaging die as a die holder!

Secure the die holders with tie down bars to prevent

the die holders from slipping out of the die bed

unexpectedly.

Accurately measure the hose O.D. with a diameter

tape. Each end of the hose should be measured to

guarantee the correct ferrule and die selection.

Select the correct ferrule and die based upon the

hose free O.D. just measured from the die chart.

1 2 3 4 5 6

No comments

Dixon-valve 100 TON RAM SEC02 External Swaged Holedall User Manual Page 3